Course Information In this lesson we will talk about electronic checklist system. Here is the outline: Introduction, Normal checklists, Non-normal checklists, Menu keys, Unannunciated checklists, Inhibited checklists, Operational notes, Deferred …
Course Information This part presents the airplane display system and explains how the displays are controlled. Here is the outline: Introduction, Display units, Display controls, Cursor control, Display reconfiguration, Loss …
Course Information In this lesson we will look at the 787’s roll control system. Here is the outline. Overview, Bank angle protection, Spoilers, Spoilers speedbrake operation, Autodrag, Non-normal operations. Courses …
Course Information This module describes the airplane’s primary flight control system. Here is the outline. APU Fuel Feed, Primary flight control surfaces, System architecture, Modes of operation, Controls, Flight control …
Course Information In this lesson we will look at the B787’s pitch and yaw control systems. Here is the outline. Pitch control system, Yaw control system, Non-normal operations. Courses are …
Course Information This module presents the airplane flap and slat systems with the following outline: Overview, Primary mode, Secondary mode, Alternate mode, Non-normal operations. Courses are constantly monitored and updated …
Course Information This module explains the airplane fire protection system. Here is the outline: Introduction, Engine fire protection, APU fire protection, Main wheel well fire protection, Cargo compartment fire protection, …
Course Information In this part we will discuss equipment cooling, ventilation and cargo heat. Here is the outline: Equipment cooling systems, Power electronics cooling system, Alternate ventilation system, Cargo heat, …
Course Information This module presents the engine thrust reverser system with the following outline: System description. Controls and indications. Normal operation. Non-normal operations. Courses are constantly monitored and updated when …
Course Information This lesson provides an introduction to the airplane engines. Here is the outline. Overview, Controls and indications, Electronic engine control (EEC), EEC idle selection, Ice crystal anti-ice function, …
Course Information In this part, we will look at engine ignition and start system. Here is the outline: Overview, Controls, Start indications, Engine start malfunctions, Auto-relight, In-flight start, Non-normal operations. …
Course Information This module presents engine sub-sytems with the following outline: Fuel system, Oil system, Vibration monitoring system, Non-normal operations. Courses are constantly monitored and updated when major changes in …
